Instruction Manual
4 Port Gigabit PoE+ Injector Midspan Hub 52V / 30W - 802.3at / 802.3af
POEINJ4G
Side View - PoE (Data and Power)
DE: Bedienungsanleitung - de.startech.com
FR: Guide de l'utilisateur - fr.startech.com
ES: Guía del usuario - es.startech.com
IT: Guida per l'uso - it.startech.com
NL: Gebruiksaanwijzing - nl.startech.com
PT: Guia do usuário - pt.startech.com
Packaging Contents
• 1x 4 Port Gigabit PoE+ Injector
RJ45 Gigabit PoE Ports
*actual product may vary from photos
• 1x Universal Power Adapter
• 3x Power Cords (NA/UK/EU)
• 1x Instruction Manual
LED Indicators
LED
System Requirements
• RJ45 terminated Cat5 or higher Ethernet cabling
• 10/100/1000 Mbps compatible Ethernet network
• Available AC electrical outlet
Indication
Solid: Indicates that the POEINJ4G is
Power (Green)
powered on
Solid: Indicates that the specific
port (1 to 4) has a PoE or PoE+ device
connected
PoE in-Use(Green)*
Product Overview
Front View
Note: If the input DATA line contains any PoE power, the PoE In-Use
LED for that port may not light up.
LEDs
Installation and Operation
The POEINJ4G can be installed between a regular Ethernet switch
and PoE powered devices, and will provide power to the connected
PoE powered devices without impacting regular data transmission
performance.
1. Ensure there are no devices connected to the Data & Power (PoE)
ports prior to connecting the Power Adapter to the POEINJ4G.
2. Connect the provided Power Cord for your region (NA, UK, or EU)
to the provided Power Adapter, then to an AC electrical outlet.
Then connect the Power Adapter to the DC Power Input on the
POEINJ4G. Ensure that the “Power”LED is lit.
DC Power Input
Side View - Data Only
3. Using RJ45 Ethernet cable, connect up to four source network
devices (i.e. router, switch, computer, etc.) to the Gigabit Data
Ports on the POEINJ4G.
4. Using RJ45 Ethernet cable, connect up to four PoE (802.3af 15W)
or PoE+ (802.3at 30W) complaint device(s) to the Gigabit PoE
Ports on the POEINJ4G.
RJ45 Gigabit Data Ports
*Depending on your application, alternatively you can connect the
Ethernet cable to a PoE splitter device to separate data and power at
the remote end (for use with a non-PoE powered device).
Manual Revision: 01/07/2015
|
Solid State Logic Network Card X Logic Series User Manual
SonicWALL Security Camera es4300 User Manual
Sony Flat Panel Television 32CX52X User Manual
Sony MiniDisc Player Model PMC MD55 User Manual
Soundstream Technologies Headphones VHP 9002 User Manual
Stamina Products Elliptical Trainer A550 705 User Manual
Stanton Stereo System CMP800 User Manual
StarTechcom Switch SV231DPDDUA User Manual
Sungale Tablet ID710WTA User Manual
Tannoy Cell Phone T303 User Manual